9
Use cookware the diameter of which is at least as large as the cooking area so that all of the heat produced
by the heating element is used.
●
Make sure that the bottom of tile pot is always dry and clean to ensure good contact between the
cookware and the cooking surface. This will also increase the life of the pots as well as the ceramic
glass surface.
●
Do not use the same cookware that you use for gas burners because the concentrated heat they
produce can deform the bottom of the pot. Therefore, you will not achieve best results when using these
pots on the ceramic glass surface.
Notice:
The glue used to seal the glass surface may leave traces on the appliance. We recommend that
the module be cleaned with a non-abrasive cleaner before being used for the first time. During the first few
hours of use, you may detect the smell of rubber. This will disappear after a short time.
Troubleshooting
It may occur that the cooktop does not function, or does not function properly. Before calling customer
services for assistance, lets see what can be done.
First of all, check to see that there are no interruptions in the gas and electrical supplies, and, in particular,
that the gas valves for the mains are open.
The burner does not light or the flame is not even around the burner.
Check to make sure that:
●
The gas holes on the burner are not clogged;
●
All of the movable parts that make up the burner are mounted correctly;
●
There are no draughts around the cooking surface.
The flame does not stay lighted on the model with the safety device.
Check to make sure that:
●
You press the knob all the way in;
●
You keep the knob pressed in long enough to activate the safety device.
●
The gas holes are not clogged in the area corresponding to the safety device.
The burner does not remain on when set to "Low".
Check to make sure that:
