ULTRASONIC PORTABLE MILK ANALYZER
w w w . m i l k o t e s t e r . c o m
CHAPTER FOUR
Working description
IN THIS CHAPTER
Preparing the device
Measuring samples
Corrections
Calibration
MILKOTESTER MASTER MINI can be used in places where no
regular electrical supply is available. MILKOTESTER MASTER MINI can
be powered by your car battery or other 12V DC external power sources.
1. Fit the support to the device and place it on a horizontal and
stable surface.
Caution: Any sources of hot or cold air can influence the accuracy
of the measurements.
2. Connect the device to 12V DC power source /220V AC to 12V
DC adaptor or 12V DC electrical lighter socket/.
3. The device will be turned on immediately. After starting the unit
goes into system check mode and will be ready for analyses in about 5
minutes.
4. Before proceeding with using the unit please read and follows
the rest of the instructions in this chapter!
NOTE:
If the unit does not start up after it is connected to the power source, check the
fuse inside the connector plugged into the electrical lighter socket.
- 8 -
