ULTRASONIC PORTABLE MILK ANALYZER
www.milkotester.com
11
1.
Unplug the 12V DC power cable from the socket on the rear
panel of the unit and then from the electrical outlet.
2.
Connect the supplied power cord 12V DC to the
Power-in
socket 12V DC
socket on the rear panel of the unit and plug
the other end of the cable into the electrical lighter socket
inside your vehicle.
3.
The device will be turned on immediately. After starting the
unit goes into system check mode and will be ready for
analyses in about 5 minutes.
NOTE:
If the unit does not start up after it is connected to the power source,
check the fuse inside the connector plugged into the electrical lighter
socket.
4.2 MEASURING SAMPLES
After MILKOTESTER MASTER is turned on from the
POWER
switch,
the display reads first:
Followed by:
You can choose among three types of milk at a time, (
upon user’s
request the device can be calibrated for any of the other types of
milk
).
Place the cup with the milk sample
Place a second milk sample under the pH probe (the automatic mode
for pH measurement must be turned on).
When you choose the desired type you use the
↑
↓
(UP and DOWN)
arrow buttons, and then press ENTER to activate analyzing.
Milk Analyzer
MASTER
Please Wait
System prepare
>Cow Milk
Sheep Milk
UHT Milk
