2. Use the supplied screws to fasten the hard drive to the tray.
3. Slide each of the trays into the hard drive bays located on the front of your unit. Pinch the buttons inside
the tray before you insert the tray.
4. Lock the trays to protect your hard drives from unauthorized removal.
5. Connect your peripherals: mouse, keyboard, audio, and cameras, to the backplane connectors.
6. Connect your local area network with internet connection, if available, to
LAN port 1
. This network is for
management and viewing.
7. Connect your camera network to
LAN port 2
. If your unit is equipped with a CNA card, connect your camera
network to the
CNA card LAN ports
.
8. Connect both power cables and plug them into a power socket.
If you only connect one power cable, both power supply LEDs turn red and an
audible alarm starts. In this case, connect both power cables and clear the alarm on
the power supply alarm clear button.
Getting started guide | Milestone Husky™ X8 NVR
10
| Before you install
