Milestone HistosMATE, Operator'S Manual

Page: 12 / 28

Milestone s.r.l. MM063-008
– HistosMATE – Operator Manual
12
2.3. Placement
HistosMATE unit can be positioned in its final place of use. Make sure it is firmly placed and the bench is
level.
During the setup, the HistosMATE must be disconnected from the main power supply.
2.3.1. Unit overview
The picture below shows the front view of the HistosMATE system.
Notice the main power switch, the exhaust fan switch and the touch screen of the HistosMATE.
An overview of the back side of HistosMATE is shown in the following picture.
Notice the open connection for the plastic hose to the exhaust fume extraction.
On the left, there is a connection to the power cord and the main fuses holder.
A proper location of the HistosMATE is near and connected to any vapors extractor
system using the hose supplied. Make sure the unit is not placed against any back surface
limiting the air cooling inlet/exhaust.
Exhaust hose
connection
Connection to
the power cord
Touch
screen
Main
power
switch
Exhaust
fan switch
Exhaust fan:

Extraction of vapors.

No toxic vapors to
laboratory.