Milestone HistosMATE, Operator'S Manual

Page: 20 / 28

Milestone s.r.l. MM063-008
– HistosMATE – Operator Manual
20
3.3. Owner setting
To view/change the software default settings press the SET VALUES icon and the following screen appears.
In this screen the user can modify:
- Reagent maintaining temperature (Maintain temperature at) (preset value: 50°C-max temperature
allowed 65°C).
- Temperature during the cleaning cycle (Cycle temperature) (preset value: 60°C-max temperature
allowed 65°C).
- Time duration of the cleaning cycle (Cycle time) (preset value: 7mins).
- Reagent management (Max cycles per reagent) (preset value: 12).
Press “Factory Defaults” icon to restore the original, factory set parameters.
Press “Back” icon to return to the Main Screen.
DO NOT MODIFY the Warm up time, but use the factory set parameter.
Milestone suggests using the default settings to perform a correct cleaning cycle.