Contents:
1.
2 x handle assemblies (complete)
2.
8 x Hex Head SS set screws
3.
1 x 5 mm Hex tool (Allen key)
Assembly process:
Step 1:
Place screw in handle
and secure in location
1
Step 2:
Use Hex tool to screw into the
captive nut in body of CEP47
Step 3:
Tighten about halfway
Step 4:
Repeat process at locations
2-3-4
Step 5:
Tighten all screws fully
without over-tightening.
Step 6:
Repeat at the opposite end
of refrigerator.
In your myCOOLMAN CEP47
you will receive handle kit.
Handle Fitting Instructions
Page 6
COMPRESSOR FRIDGE·FREEZER
4
3
2
1