Turning the unit on and off:
Step 1:
Plug in the AC or DC power cable (ensure power is on at source).
Step 2:
Press the
button once to turn on - To switch off press and hold the
for 3 seconds.
Changing the set temperature:
Step 1:
Use the
and
button to change the temperature.
Step 2:
Once you reach your desired temperature you do not need to press any further buttons.
Just let it sit until you see the temperature flash 5 times – this means the temperature is now
locked in.
Control Panel CEP47
NOTE:
Temperature can be set from –18 ºC to +10 ºC
NOTE:
• The ‘Power/Status Indicator Light’ will illuminate green to show the unit is running OK.
• The system has a memory which records your last setting before shutting down.
• If the power supply is cut off or disconnected, the unit will switch off automatically,
once the power supply is restored it will automatically switch back on. Your unit may
temporarily show a status of E3 or E4 and will clear after approximately 5 minutes.
• When adjusting settings directly on the fridge, the LED display will flash to let you know
that the settings are now adjustable.
NOTE:
The fridge temperature shown on the LED (as a solid, non flashing icon) is the current
inside temperature. This will lower to your set temperature, given time to chill down.
LED Control Panel & Operation Instructions
Page 4
Power Switch
Power/Status
Indicator Light
Turbo Indicator Light
LED-Display
Temperature Settings
Turbo Switch
COMPRESSOR FRIDGE·FREEZER
