background image

2121 Blount Road Pompano Beach, FL 33069        MileMarker.com        1.800.886.8647

PAGE 3

PRECAUTIONS

Keeps hands and body away from roller fairlead (cable intake slot) when operating.
Secure vehicle in position before using winch.
 Do not exceed winch load weight capacity.
Be certain winch is properly bolted to a structure (or vehicle) that can hold the winch load.
Always use proper couplings when connecting winch cable hook to load.
Do not lift items vertically. The winch was designed for horizontal use only.
Do not overload the winch. It will do the job better at the load it was intended.
Do not use inappropriate attachments to extend the length of the cable.
 Do not lift people or hoist loads over people.
 Do not come in between the winch and the load when operating.
 Do not apply load to winch when cable is fully extended. Keep at least 5 full turns of cable on the drum.
After moving an item with the winch, secure the item. Do not rely on the winch to hold it for an extended period.
 Examine winch before using. Components may be affected by exposure to everyday weathering, chemicals, salts, and rust.
 Do not fully extend cable while under load. Keep 5 COMPLETE TURNS of cable around the winch drum.
When loading a boat into a trailer without reel or side hull rollers, make sure the trailer is submerged in the water when the boat is loaded by the 
winch. Attempting to drag the boat on to the trailer while on land can cause winch failure and possible injury.
 Do not operate winch if cable shows any signs of weakening, is knotted or kinked.
Winch does not have a locking mechanism. Secure load after moving.
Do not cross over or under the cable while it is in process of loading.
Do not move vehicle with cable extended and attached to load to pull it. The cable could snap.
Apply blocks (such as a wheel choke) to vehicle when parked on an incline.
Respool cable properly.

1.
2. 
3. 
4. 
5. 
6. 
7. 
8. 
9. 

10. 
11. 
12. 
13. 
14.

15. 

16. 
17. 
18. 
19. 
20. 
21.

Summary of Contents for 70-50050C

















Reviews: