Mikrotron EoSens 25CXP, Reference Manual, Page: 51 / 70

User Set Control 4CXP Camera
MIKROTRON GmbH page 51 of 70
User Set Control
User sets allow you to save the current camera configuration into the camera’s internal Flash
memory. A user set can be loaded at runtime. If the user set is defined as default, it will be loaded
during the start-up of the camera.
Name Access Length
[Bytes] Interface Page
UserSetSelector R/W 4 Enumeration 51
UserSetLoad[UserSetSelector] W 4 Command 51
UserSetSave[UserSetSelector] W 4 Command 52
UserSetDefaultSelector R/W 4 Enumeration 52
UserSetSelector
This feature selects which user set will be loaded, saved or configured.
Access read/write
Type: enumeration
In:
Enumeration Description
Default selects the factory setting user set
UserSet1 selects the first user set
UserSet2 selects the second user set
UserSet3 selects the third user set
Out: see above
Remark: Set the UserSetSelector first to select a user set for further operations (see below).
UserSetLoad[UserSetSelector]
Loads the user set specified in UserSetSelector from the camera flash memory to the camera
registers and activates it.
Access write
Type: command
In:

Out:
Remark:
If the selected User Set has not been defined previously an error message occurs.
The default user set is a set of factory settings predefined by the manufacturer.