4CXP Camera
Rear Side of the Camera with DIN Connector
page 14 of 70
MIKROTRON GmbH
Hardware
4CXP cameras are available with 5W5 (MC-4082/4086) or DIN connector (MC-4083/4087). All are
equipped with the same sensor providing a resolution of 2336 x 1728 pixels. The color versions are
equipped with a Bayer color filter at the top of the sensor. This filter will code the color information
in the image pixels.
Table A:
4CXP camera features
Camera
Data width
[bit]
Mono: m
Color: c
Lens
adapter
Link speed
Max. frame-rate
@ 2336 x 1728
Connector Type
MC4082
8/10
m
C/F
CXP-6
563 fps
5W5
MC4083
8/10
c
C/F
CXP-6
563 fps
5W5
MC4086
8/10
m
C/F
CXP-5
566 fps
DIN1.0/2.3
MC4087
8/10
c
C/F
CXP-5
566 fps
DIN1.0/2.3
Rear Side of the Camera with DIN Connector
At the rear of the cameras MC4086/4087 the DIN1.0/2.3 connector and the power connector are to
be found. The DIN connector with four lines is used to connect the camera with a CoaXPress frame
grabber and to supply the camera with power (power-over-coax, so called PoCXP).
Alternatively, a 12 pin Hirose power connector is available to connect an external power supply.
Remark:
In order to connect an external trigger take the pinning of the Hirose connector on
page 17 into account and read the trigger settings starting on page 39.
CoaXPress DIN 1.0/2.3 connector providing PoCXP
12 pin power
connector
LED