background image

1.  
2.  

3.  

This topology shows typical Smallcell network architecture. HeNB works as LTE
the base station provides LTE service to UE;

NMS: HeNB management system (HeMS) is a virtualized solution that provides a full lifecycle
of small cell management functions. It supports TR-181 and TR-196 data model
which are defined by Broadband.
HeNB-GW: HeNB Gateway is deployed between HeNB and MME, provide the
aggregation of control and user plane traffic and capabilities necessary to manage
large clusters of small cells. It plays functions of data aggregation and forwarding,
and S1/X2 proxy

Configuration Flow

HeNB can get the IP address by DHCP and Static assignment. 

WAN port is SFP port and is named as ID1 in the Network configuration.

LAN port os Ethernet port and is named ID2 in the Network configuration.

In the DHCP method, can check the HeNB IP address by MAC Scan.

In the static assignment method, configuration procedures are as below:

Configure IP address of PC as 192.168.200.100/24

Connect to HeNB WAN interface directly, login WebGUI through https

Default maintenance IP address: 192.168.200.200

User name: admin

Password: MikroTik

Configure HeNB IP address

Configure "Address Type" as "Static"

Configure "IPv4 address" and "Mask" accordingly.

Summary of Contents for Intercell 10 B38+B39













Reviews: