2
In order to use the device for a maximum long time and without problems, as well
as to be able to use all of its options, please read carefully the whole instruction
manual and observe the directions in it.
The standard set of
STINGER 2
comprises:
- searching frame 1x1m;
- monitor unit with built in accumulators;
- recharge device for 220 V;
- recharge device for 12 V;
- detailed instruction manual for operation.
I f a n y o f t h es e item s ar e m is s in g, im m ed i a t el y i n f o r m u s , o r o u r a u to r iz e d
d e a l er w h er e yo u pu r c h a s e d yo u r d e tect o r .
STINGER 2
has the following buttons for control:
- Button
„ON – OFF / CLEAR“
for switch on and switch off of the device and for automatic
nullification to the soil conditions.
-
Buttons „
SELECT“, „
“
and
“
“
serve for work with the menu and the settings, choice of
modes of discrimination and movement.
- Button „
Auto GEB“
- serves for automatic setting of the device to earth conditions of a
working terrain, and for memorization of definite objects or soil.
- Button „
MODE“ -
used for switching between digital and graphic display of the indications for
discrimination –
ID1
and
ID2
and switching between the
Dynamic
and the
Static
mode.
- Button „
VCO / DISCR“
- serves for switching between the mode of discrimination and the
„
VCO“
mode (multi – frequency sound) which also appears as common mode of searching for
all metals.
1. Assembling of the device:
Assembling the
STINGER 2
is simple and you don’t need any special tools.
When use the round coil 45cm. or 22x32cm.:
The bearing rod is assembled by inserting of the
lower part into the upper one. Choose the desired length of the whole construction and the fixing
clamp is tightened between both parts of the bearing rod. The lower part of the bearing rod is put
with the opening between the ears of the coil and the plastic bolt is tightened by choosing the
