Page 12
Page 13
Device Manager on your PC contains informations on which COM
port is used for USB communication with the mikromedia board for
ARM. In this case the COM4 port is used.
01
Settings
01
02
03
03
From the drop menu select COM port on your PC.
02
Set Baud Rate to 19200.
Enter 12 in the Oscillator field (if you use different oscillator
enter its value in MHz instead).
04
04
Right click on USB port, then on properties in the
drop-down list.
06
05
Select the Port Settings tab from pop-up window.
06
Click on the Advanced... button.
05
