LV24- v6 Development System
MikroElektronika
page
Placing MCU card into the DIMM-168P connector is performed as follows:
Extraction levers used to fix
the MCU card in ‘closed’ position
Extraction levers used to fix
the MCU card in ‘open’ position
In addition to the MCU card with microcontrollers in 100-pin TQFP package, there are also MCU cards with microcontrollers in 44, 64
and 80-pin TQFP package which can be ordered separately. They are placed into the appropriate connector in the same manner as
described above.
1
A
B
Open extraction levers A and B
2
Place the MCU card into the DIMM-168P connector
3
Push the MCU card down gently into the DIMM-168P connector and
lift extraction levers slowly at the same time
4
Close the extraction levers when the MCU card is properly placed
into the connector
