Page 18
Page 19
Figure 3-11:
Placing ICD2®
connector
The microcontroller can be also programmed with
ICD2®
or ICD3® programmer
. These programmers connects
with mikromedia board via
ICD2 CONNECTOR BOARD.
Programming with
ICD2
®
or ICD3
®
programmer
In order to enable the ICD2® and ICD3® programmers to be connected to the
mikromedia board, it is necessary to provide the appropriate connector such as the
ICD2 CONNECTOR BOARD
. This connector should be first soldered on the CN5 connector.
Then you should plug the ICD2® or ICD3® programmer into it,
Figure 3-11
.
Figure 3-12:
Connecting ICD2®
or ICD3® programmer
electronic components distributor
