Page 12
Page 13
Programming with mikroBootloader
You can program the microcontroller with bootloader which is
pre-programmed by default. To transfer .hex file from a PC to
MCU you need bootloader software (
mikroBootloader
USB
HID
) which can be downloaded from:
After the mikroBootloader software is downloaded, unzip it to
desired location and start it.
http://www.mikroe.com/downloads/get/1605/
mikrobootloader_pic32_v200.zip
Figure 3-2: USB HID mikroBootloader window
step 1 – Connecting mikromedia
01
01
To start, connect the USB cable, or if already connected
press the
Reset
button on your mikromedia board. Click the
Connect
button within 5s to enter the bootloader mode,
otherwise existing microcontroller program will execute.
electronic components distributor
