Mikroe CODEGRIP FOR PIC, User Manual

Page: 23 / 44

P A G E 23
C O D E G R I P f o r P I C M C U s U S E R M A N U A L
OPTIONS
5.1.2 Options
The Options Menu item displays a set of options, which are used to select
and configure the target MCU.
Vendor
Options: a list of supported MCU vendors.
The Vendor dropdown menu allows the MCU vendor to be selected. If All is
selected the vendor filtering will not be applied.
MCU
Options: a list of all the supported MCUs from the selected vendor.
This dropdown menu allows the target MCU to be selected. It contains a list
of MCUs available from the selected vendor.
Typing in this textbox will dynamically filter the MCU list, showing only the
MCU names containing the characters typed so far.
Protocol
Options: ICSP, EJTAG
This dropdown menu is used to select the programming protocol.
Speed
Options: 500 kHz, 1 MHz, 2 MHz, 3 MHz, 4 MHz
This dropdown menu allows the link communication clock frequency
(communication speed) to be selected.
Programming Type
Options: Vpp first entry mode, Vpp first entry mode, Low voltage
The Vpp first entry mode prevents the device from executing code prior
to entering Program/Verify mode. The Vdd first entry mode is useful when
programming the device when Vdd is already applied, for it is not necessary
to disconnect Vdd to enter Program/Verify mode.
The Low voltage programming type allows the devices to be programmed
using Vdd only, without high voltage.