96
¢
1. Structural precautions
Please read carefully through the instruction manual and the technical
information for proper use and safety. In this manual, safety precautions are
classified by "DANGER" and "CAUTION".
Equipment use (atomic energy, aerospace, medical treatment,transportation,
or various safety devices) that may result in serious bodily injury or loss of
life directly by mechanical failure or mishandling, careful examination is
necessary. Contact us for further information.
The company has taken all possible measures to produce a quality
product; however, continuous rotational states when the clutch can not
be disengaged or coasting of the machine when the brakes went off is
envisioned as emergency. Please pay attention to safety measures in
case anything goes wrong.
DANGER
ò
When death or serious injury may result by
mishandling
CAUTION
ò
When disability or only physical damage may result
by mishandling
Do not use the product near flammable liquids or in the
presence of gas and other explosive air particles.
DANGER
ò
Do not use the product in the presence of fire
and explosive hazards.
Touching the product during operation could cause injury.
Place a safety cover to avoid any accident.
Additionally, set up a safety mechanism for quick stop of
the product when opening the cover.
DANGER
ò
Use a safety cover.
The driven and driving sides could be completely
detached when the product is damaged.
Set up a safety mechanism such as a safety brake to
avoid any danger.
DANGER
ò
Set up a safety mechanism
¢
2. Mounting precautions
Depending on the tightening adjustment of bolt or screw,
exceptionally dangerous situations such as product
damage or performance degradation could occur.
Always use a calibrated torque wrench and clamp at the
tightening torque specified by Miki Pulley.
DANGER
ò
Tighten bolts or screws completely.
It is very dangerous if the driving part starts by accident
while mounting the product. Be sure that the main power
of the equipment is turned off.
DANGER
ò
Do not turn on the power of the equipment.
The installation of the product must be performed within
the specified maximum permissible error.
Using the product with more than the ma ximum
permissible error could cause damage or adverse effect
on the equipment.
CAUTION
ò
Use the product within the specified
maximum permissible misalignment.
Using a bolt or screw that is not specified by our company
could damage the product. Do not use any bolt or screw
unspecified.
CAUTION
ò
Do not use any unspecified bolt or screw.
To avoid any injury by stripping, spring pin or keyway,
make sure to wear protective equipment such as safety
glasses or gloves.
CAUTION
ò
Wear protective equipment.
Lifting of a heavy weight could cause back injury.
Use a hoist when carrying or mounting the product.
CAUTION
ò
Carry and mount the product by using a
hoist.
Safety Precautions
(Please read prior to use)
S
af
et
y
P
re
ca
u
tio
n
s
Summary of Contents for COUPLINGS
Page 3: ......
