66
S
E
R
V
O F
L
E
X
C
u
st
o
m
iz
e
Customize
C U S T O M I Z E
At Miki Pulley, customized products according to customer needs
are also developed using a thorough system. Useful products will
surely be delivered to customers even if they are not satisfied with
the catalog specifications.
The standard-specification SFC model applies anodic coating
on its main body. Without coating the surface, generation of gas
under a vacuum environment is prevented. It is also suitable
for use of equipment such as semiconductor-manufacturing
machines, etc. under a vacuum environment.
This specification supports position detection sensors such as
encoders, photo sensors, etc. by installing a slit plate between
hubs.
By drilling tap bores on the hub edge, a position detection sensor
such as slit plate, etc., can be installed.
This is a specification for long intervals between installation
shafts. It is also available for synchronization of the gantry
mechanism, etc.
SFC model
Specification without anodic coating film
SFC model
Specification for SERVO FLEX with a slit plate
SFC model
Specification for SERVO FLEX with edge-part tap bores
SFC model
Specification for SERVO FLEX with a long spacer
Summary of Contents for COUPLINGS
Page 3: ......
