2DH Boussinesq Wave Module - Examples
31
Binary data files
Parameter files
4.2.3
Rønne Harbour
Purpose of the example
The purpose of this example is to simulate the wave disturbance in Rønne
harbour, Denmark, situated in the Baltic Sea. Of special interests is wave dis-
turbance at the new cruise terminal, see Figure 4.5.
Figure 4.5
Right panel shows the new cruise ship terminal in Rønne harbour, Den-
mark. Left panel shows the harbour layout before the cruise terminal
was constructed
Model setup
The model setup is illustrated in Figure 4.6.
The model area is chosen based on following considerations:
The model is turned –22.5° relative to true north to align the model grid rela-
tive to the main direction of the approach of incoming waves.
Name:
Layout.dfs2
Description:
Bathymetry and sponge layer coefficients
Name:
Bc.dfs0
Description:
Boundary conditions – time series of surface elevation and its
curvature
Name:
Diffraction.bw
Description:
Diffraction test
Summary of Contents for 21 BW
