Mighty Seven SN-1268, Manual

Page: 3 / 60

3
1. This tool should only be used as a hand operated tool. It is powered by compressed air and is not
insulated against electric shock.
2. This tool is specially designed for chipping away surface materials or objects. Any application or use of
this tool other than what it is designed for is strictly prohibited.
3. High sound levels may cause hearing damage. Always wear hearing protection when operating this tool.
4. User must wear proper clothing. Loose clothing, long hair, stings, straps, belts and jewelry should not be
worn when operating this tool.
5. Wearing eye/face protection can reduce the danger of high-speed materials being ejected by the tool.
6. Working with certain materials may create emission of dust and fumes, which may cause a potential
explosive environment and a hazard to the health. Wearing correct breathing protection and taking some
preventive measures are recommended.
7. Make certain to stand on a solid or firm location and keep body in well-balanced position while operating
this tool.
8. Using this tool will cause the ejection of particles when chipping or demolishing. Make sure there is no
bystander within the vicinity of working area.
9. To avoid vibration injury, the user should use other effective damping devices, in stead of free hand, to
hold the chisel when necessary.
10.Make sure that the all the specifications of the chisel to be used are compatible with this tool.
11.Make sure that the direction of the chips generated from the chisel is properly directed so as not to create
a hazard.
12.Always turn off the air supply and disconnect the air hose before changing the chisel or making
adjustments on this tool.
13.Release the throttle trigger to avoid danger if there is a failure of energy supply and when connecting or
disconnecting the air hose.
14.Beware if the compressed air hose breaks unexpectedly, or is being connected or disconnected
improperly. This whipping action may cause injury.
15.Prolonged use will cause user fatigue. Periodic breaks are recommended for user safety.
16.It is recommended to stop operating the tool whenever the user experiences discomfort, tingling or pain
during use.
17.Make sure there is no gas or combustible material stored near the tool when servicing, changing chisel,
or storage.
18.Avoid storing this tool where it is subject to high humidity.
Warning: