0
Press power button, then shut down window will appear, click OK, the unit will power
off after a few seconds.
Disconnect the power by keyboard and mouse
Step1: Enter into the Menu system (icon below)
, then select “System Shut Down”
The
“Shut down” window will appear.
Step2: Click OK, the unit will power off after a few seconds.
Step3: Disconnect the power.
Login
Once the DVR boots, the [POWER
]
indicator will show constant red. The default
factory password is blank. After the DVR boots, press t h e [ MENU
]
key on the front
panel or right click the mouse.
Choose “Login” interface as shown below:
Pic 2.2 user login
After the correct user name and password are input, you can enter the menu system
to setup and configure the DVR for operation andLive preview interface:
Summary of Contents for H.264 NETWORK Embedded DVR
