2
1.
Cleaning : Switch the appliance off and remove the Nose/ear hair
trimmer attachment or bear trimmer attachment from the appliance by
turning it and rinse it throughly under running water.
Do not wet the appliance unit.The appliance itself should be cleaned with
a dry cloth only.
After complete drying. Replace the ctuuing unit as well as the protective
cap
2.
Oil the beard trimmer cutting unit :
Apply one or two drops of oil between the cutting teeth and spread out
the oil evenly.Wipe off excess oil with a cloth.
1.
Before using the appliance, please insert the 1.5V Alkaline battery (not
included),type LR6, into the battery compartment with the correct polarity.
2.
Please make sure that the appliance is properly reassembled before
starting to use it.
3.
Nose/EAR HAIR TRIMMER
Remove the protective cap on the trimmer and push the on/off switch
upwards.Now the cutter ratates and you can start trimming hairs in nose
and ear.The integrated light will be helpful.
4.
Beard Trimmer
Take the nose/ear hair trimmer attachment off the appliance by turning
it.The beard trimmer attachment is also inserted by turning it whist
pressing on the housing at the same time. Make sure, before attaching it,
that the cutting unit points to the right by about a quarter turn so that the
two inner riges fit properly into the guide grooves on the upper housing.
The beard trimmer is particularly suitable for use on areas that are difficult
to reach and shorten or shape(smaller) beard. The integrated light will be
helpful
MAINTENANCE AND CLEANING
OPERATION
Summary of Contents for GHT 15
