Removing Booster Seat
Removing Child
17
The mifold Grab-and-Go Booster
®
folds into a very
compact size for easy storage when not in use.
To store Booster Seat:
- Slide open Shoulder Belt Guide and remove
Vehicle Shoulder Belt.
- Slide lap portion of Vehicle Lap and Shoulder
Belt out of both Lap Belt Guides.
- Push both Lap Belt Guides into their storage
position.
- Remove and fold the mifold Grab-and-Go
Booster
®
.
- Store the mifold Grab-and-Go Booster
®
in a
secure location such as the glove box, trunk,
or storage area.
Transportation and storage of Booster Seat:
To Remove Child:
- Unbuckle Vehicle Lap and Shoulder Belt.
- Slide lap portion of Vehicle Lap and Shoulder
Belt out of Lap Belt Guide on buckle side.
- Move Vehicle Lap and Shoulder Belt off of child.
- Remove child from Booster Seat.
Note:
Should the lap and shoulder belt inadvertently be
switched into the automatic locking retractor mode (ALR)
and the vehicle seat belt is locked, follow the steps below
to remove the lap belt.
1
. Pull out and hold the shoulder belt to prevent further
retraction. Be aware not to allow shoulder belt webbing
to retract during this entire procedure.
2
. Have your child lean away from the vehicle buckle.
3
. Lift mifold up on the buckle side and remove lap belt.
If removal of the lap belt is not possible due to the vehicle
belt continuing to tighten, the vehicle seat belt should be
cut to remove the child.
Summary of Contents for Grab-and-Go Booster
Page 25: ......
