Miele WXF 660 Operating Instructions Manual Download Page 36

Page: 36 / 104

5. Adding detergent

CapDosing

Three different types of capsule are
available:



= Fabric care (e.g. fabric

softener, proofing agent)



= Additives (e.g. detergent

enhancers)



= Detergent (for the main wash

only)

Each capsule contains the correct
amount for one wash cycle.

Capsules are available to order from
Miele's online shop, Miele's customer
service, or from your Miele dealer.



Capsules pose a health risk.

The ingredients of capsules can be
hazardous to health if they are
swallowed or come into contact with
skin.
Keep capsules out of the reach of
children.

Activating CapDosing



Touch the



sensor button.

The following appears in the display:











No Cap





Touch the



sensor buttons until

the capsule you want appears in the
display.



Confirm the capsule with the

sensor button.

Inserting a capsule



Open the detergent dispenser drawer.



Open the lid of the





compartment.



Press the capsule in firmly.

Summary of Contents for WXF 660









































































































Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands

Miele WXF 660, Operating Instructions Manual

Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands