background image

Programme chart

45

Programmes accessed via Further programmes/

 with the

programme selector

Outerwear

Cold to 40°C

Max. load 2.5 kg

Items

Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®,
WINDSTOPPER®, etc.

Notes

– Close any zips and Velcro fasteners before washing.

– Do not use fabric softener.

– If required, these items can also be reproofed using the

Proofing

 programme. Reproofing after each wash cycle is not

recommended.

 

 Sportswear 

Cold to 60°C

Max. load 3.0 kg

Items

Sportswear such as jersey shirts and leggings, and microfibre and
fleece garments.

Notes

– Do not use fabric softener.

– Observe the instructions on the care label.

 

 Automatic plus 

Cold to 40°C

Max. load 6.0 kg

Items

Mixed loads of garments sorted according to colour which are
suitable for the 

Cottons

 and 

Minimum iron

 programmes.

Notes

The wash parameters (e.g. water level, wash rhythm and spin speed)
are adjusted automatically in this programme to ensure the best
possible care and wash result for each item.

Summary of Contents for WWG 660









































































































Reviews: