Miele WWF 060 Operating Instructions Manual Download Page 84 | Manualshive

Page: 84 / 92

background image

Settings

84

RemoteUpdate

The RemoteUpdate function updates
the software in your washing machine.

The RemoteUpdate function is
deactivated as standard.

If you do not install a RemoteUpdate,
you can continue to use your washing
machine in the usual way. However,
Miele recommends installing
RemoteUpdates.

Activation

The RemoteUpdate menu option is
only displayed and can only be
selected if you have added your
washing machine to your WLAN
network (see “Miele@home” in the
“Settings” chapter).

Miele’s RemoteUpdate function can
only be used if the washing machine is
connected to a WLAN network and you
have an account in the Miele@mobile
app. The washing machine must be
registered with your account in the app.

See the Miele@mobile app for terms
and conditions of use.

Some software updates can only be
carried out by Miele Service.

Running a RemoteUpdate

If a RemoteUpdate is available for your
washing machine, it will be displayed
automatically for you.

You can choose to start the
RemoteUpdate immediately or wait until
later. If you select “Start later”, the
prompt to run the RemoteUpdate will
be displayed again the next time you
switch on your washing machine.

The RemoteUpdate can take a few
minutes.

Please note the following information
about the RemoteUpdate function:

– You will only receive a message when

a RemoteUpdate is available.

– Once a RemoteUpdate has been

installed, it cannot be undone.

– Do not switch off the washing

machine during a RemoteUpdate.
Otherwise, the RemoteUpdate will be
aborted and will not be installed.

«
...
82
83
84
85
86
...
»

Summary of Contents for WWF 060





























































































Reviews:

No comments

Related manuals for WWF 060

Brand: NEFF Pages: 2

Brand: NEFF Pages: 68

Brand: NEFF Pages: 2

Brand: VALBERG Pages: 96

Brand: Gaggenau Pages: 22

Brand: Gaggenau Pages: 34

Brand: Haier Pages: 20

Brand: V-ZUG Pages: 6

Brand: NEFF Pages: 60

Brand: Scheppach Pages: 36

Brand: Fagor Pages: 103

FP-90LST060GMTL-N

Brand: Midea Pages: 5

Spirit topLine 7540i

Brand: Schulthess Pages: 60

Brand: Hotpoint Pages: 16

Brand: Hotpoint Ariston Pages: 24

Brand: Grundig Pages: 116

Brand: Bartscher Pages: 18

Brand: Alliance Laundry Systems Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands