Frequently Asked Questions
54
A message appears in the display at the end of the program or
when the appliance is switched on
Message
Possible cause and remedy
Align the washing
machine
The smoothing process which the laundry undergoes
at the end of the program could not be carried out
properly.
Check whether the washing machine is aligned
correctly as described in “Installation and
connection – Levelling the machine”.
Check whether the maximum delivery height of
1 m has been exceeded.
If the fault message appears again, contact the
Service department. The washing machine can still be
used but with reduced functionality.
Check dosage
Excessive foam has built up during washing.
Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.
Sanitize info: Run a
high temp. program
or the "Clean
Machine" program
A wash program using a temperature above 60 °C has
not been run for a long period of time.
Turn the program selector to
More programs
/
.
Touch the
sensor buttons until
Maintenance
appears in the display.
Touch the
OK
sensor button to confirm.
The following appears in the display:
Clean Machine
Touch the
OK
sensor button to confirm.
Run the
Clean Machine
program using the Miele
clean machine or a universal powder detergent.
The washing machine is cleaned which prevents
bacteria and odour buildup.
The message which appears at the end of the program or when the washing
machine is switched on must be confirmed with the
OK
sensor button.
