WASHING
31
Omitting the final spin (Rinse hold)
Touch the
sensor control (Rinse
hold).
The laundry is not spun after the final
rinse cycle and remains in the rinse wa-
ter. This helps prevent creasing if the
laundry is not going to be removed from
the washer-dryer immediately after the
end of the programme.
To start the final spin:
The sensor control for the optimum spin
speed lights up in the control field. You
can change the spin speed.
Start the final spin with the
Start/Add
laundry
sensor control.
To end the programme:
Touch the
sensor control (no spin).
Touch the
Start/Add laundry
sensor
control.
The water will be pumped away.
Omitting the rinse-spin and the final
spin
Touch the
sensor control (no spin).
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes, an extra rinse is
introduced with this setting.
