Miele WT 946 i S WPS, Operating Instructions Manual

Page: 61 / 84

Building under:
This machine is specially designed for
installation under a continuous worktop
run in a fitted kitchen.
It is supplied with a cover plate which
must be used in place of the machine’s
own lid.
,
To ensure electrical safety the
cover plate must be fitted and must
not be removed!
Please note:
– The machine must not be used
without the front panel in place.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
– The slides supplied should be used
to protect the floor from damage
when the machine is pushed into
position or taken out for servicing.
– For building under a worktop where
the niche height is 870 mm a raising
kit, height 40 mm, should be used.
For niche heights in excess of 920
mm a second raising kit will be
required.
The raising kits (incl. Fitting
instructions) are available from the
Miele Spare Parts Dept.
Installation and connection
61