manualshive.com logo in svg

Miele WT 946 i S WPS, Operating Instructions Manual

Share
Download
Miele WT 946 i S WPS Operating Instructions Manual Download Page 30

Programme overview

COTTONS

Extra dry

Fabric type

Multi-layered fabrics, which are thoroughly dried in the

Normal

programme.

Additional options

Thermospin max. 1500 rpm, Drying / Low temp.

Note

–

Do not dry jerseywear in the

Extra dry

programme

(tendency to shrink)

Max. load

2.5 kg

Normal

Fabric type

Single and multi-layered fabrics, e.g. mixed load of cotton
fabrics (e.g. towelling, jerseywear).

Additional options

Thermospin max. 1500 rpm, Drying / Low temp.

Max. load

2.5 kg

Note for test institutes:
Programme setting for the EN 50229 Standard:
COTTONS Normal

Hand iron

Fabric type

Cotton or linen fabrics (e.g. table linen, bed linen, starched
laundry etc.).

Additional options

Thermospin max. 1500 rpm, Drying / Low temp.

Max. load

2.5 kg

Machine iron

Fabric type

Cotton or linen fabrics, including starched laundry for
machine ironing.

Additional options

Thermospin max. 1500 rpm, Drying / Low temp.

Note

–

The laundry should be rolled up before ironing to prevent
it from drying out.

Max. load

2.5 kg

DRYING

30

Summary of Contents for WT 946 i S WPS





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands