manualshive.com logo in svg

Miele WT 946 i S WPS, Operating Instructions Manual

Share
Download
Miele WT 946 i S WPS Operating Instructions Manual Download Page 40

,

Disconnect the machine from the

electricity supply by switching off at
the wall socket and withdrawing the
plug before any cleaning and
maintenance work.

Cleaning the machine

^

Clean the casing with a mild
non-abrasive cleaning agent or with
soap and water. Wipe dry with a soft
cloth.

^

Clean the drum with a suitable
proprietary cleaner for stainless steel.

E-Cloth

^

A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, Part Number 98013530,
which is suitable for cleaning
surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.

,

Do not use solvents, abrasive

cleaners, glass cleaners or
all-purpose cleaners. These could
damage plastic surfaces and other
parts. Do not use a hose to wash the
machine down.

Cleaning the detergent dispenser

^

Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the red release catch and at
the same time pull the drawer right
out of the machine.

^

Clean the detergent dispenser
compartments and the fabric
conditioner compartment with warm
water.

Cleaning and care

40

Summary of Contents for WT 946 i S WPS





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands