background image

Programme chart

32

QuickPowerWash

60 °C – 40 °C

Max. load 4.0 kg

Items

Lightly to moderately soiled garments which are also suitable for
washing in the 

Cottons

 programme

Tip

A special saturation process and wash rhythm ensure that the laun-
dry is cleaned particularly quickly and thoroughly.

Express 20

Cold to 40 °C

Max. load 3.5 kg

Items

Cotton garments that have hardly been worn or are only very lightly
soiled

Tip

The 

Short

 extra option is activated automatically.

ECO 40-60

Max. load 8.0 kg

Items

Mixed loads of normally soiled garments for the 

Cottons

 pro-

gramme; sorted according to colour and can be washed at 40 °C–
60 °C.

Tip

Follow the instructions on the care label

Proofing

40 °C

Max. load 2.5 kg

Items

Treating microfibre fabric, ski wear or table linen made from mainly
synthetic fibres to provide a finish which is resistant to water and dirt

Tip

– The items must be freshly laundered and spun or dried before

proofing.

– For best results, the items should be heat-treated afterwards. This

can be achieved by drying them in the tumble dryer or ironing
them.

Summary of Contents for WSD 323 Selection





















































































Reviews: