Miele WS 5425 MC 13 Operating And Installation Instructions Download Page 43

Page: 43 / 52

Cold water inlet hose
- blue stripes -
(see "Plumbing")

Hot water inlet hose
- red stripes -
(see "Plumbing")

Electrical connection
(see "Electrical connection U.K.")

Coin mechanism (optional)

Small panel with text

Drain hose for drain pump (LP) ver-
sion (see "Plumbing")

Concrete plinth (to be supplied on
site), if not available a steel plinth*
can be purchased from Miele, (en-
sure there is secure connection to
the floor).

Hexagonal M 10 nut

Butt strap

Screw, washer and plug 8 x 40

When installing on a suspended
floor, use the appropriate fixing kit
(plugs and screws).

Washer and Dryer stack

A Miele tumble dryer can be stacked
with the washing machine. A stacking
kit* is necessary.

Coin mechanism / Time counter

This machine can be equipped with a
coin / token box.*

Separate installation and wiring instruc-
tions are supplied with the coin box.

A wall bracket is required for a washer
and dryer stack .

The machine can also be connected to
an already existing time counter. A spe-
cial connection cable * is required for
this.

The re-programming of the machine
then required must only be carried out
by an authorised Miele Service Dealer
or the Miele Service Dept.

The machine must not be used in
conjunction with equipment de-
signed to automatically switch the
machine off (e.g. Timer switches).

All items marked * are available to order
from your Miele Dealer or from the Miele
Professional Sales Dept.

Installation

Summary of Contents for WS 5425 MC 13





















































Search results

Summary of Contents for WS 5425 MC 13

Reviews:

Related manuals for WS 5425 MC 13

Brands by name

Popular brands

Miele WS 5425 MC 13, Operating And Installation Instructions

Search results

Summary of Contents for WS 5425 MC 13

Reviews:

Related manuals for WS 5425 MC 13

Brands by name

Popular brands