To change a programme
Programmes
A
,
B
,
C
,
D
,
E
can be
changed at any time as long as the
programme sequence allows for this.
^
Turn the programme selector to the
required programme. The new
programme will continue from the
same stage that the previously se-
lected programme was at.
Except:
If the programme selector was turned
past the
r
End position, in which case
the previous programme would be can-
celled and the new programme would
have to be started afresh.
The previous programme would also be
cancelled if the programme selector
was moved from or to the following:
–
F
Separate rinse
–
G
Separate spin
–
H
Separate drain
When using a coin box / time coun-
ter the programme is locked after 3
minutes and no more changes are
possible.
To cancel a programme
^
Turn the programme selector to the
r
End position.
The programme sequence indicator
lights flash through the other
programme stages until the
r
End
position is reached.
To omit a programme stage
^
Turn the programme selector to
r
End.
As soon as the programme sequence
light for the stage at which the
programme should continue starts
flashing:
^
Turn the programme selector back to
the appropriate programme
within 3
seconds
.
To repeat a programme stage
Pre-requisite:
A programme stage must have finished
before it can be repeated:
^
Turn the programme selector to
r
End.
When
r
End lights up in the sequence
display:
^
Select the programme required.
^
Press the
h
Start button.
^
After approx. 5 seconds, turn the
programme selector to
r
End again.
Once the indicator light of the
programme stage to be repeated starts
flashing:
^
Turn the programme selector to the
appropriate programme
within 3 seconds
.
How to wash correctly
17
