Cleaning and Care
Problem solving guide
To clean the filter in the water inlet valve:
Using pliers, carefully loosen the ribbed
plastic nut on the inlet valve, and unscrew.
Use water pump pliers to withdraw the
plastic filter by the bar (see illustration).
Clean and put back in the reverse order.
The machine must not be used without the
two dirt filters being put back in place
Any work on the electrical components of
this machine should only be carried out by
a suitably qualified and competent person.
Unauthorized repairs could be dangerous.
There are, however, minor faults which can
be corrected without contacting the Service
Department.
Opening the drum door in the event of a
power failure
Turn the programme selector to “
r
End”.
Open the drain valve access flap.
Press the emergency release lever down-
wards, (see illustration) and hold down
until no more water drains out.
21
M.-Nr. 05068971/03
Summary of Contents for WS 5073 SLUICE
Page 2: ...M Nr 05068971 03 2 ...
Page 29: ...29 M Nr 05068971 03 ...
