Miele WMR 861 WPS Operating Instructions Manual Download Page 104

Page: 104 / 116

Settings

104

Changing the detergent type

Dosage amounts for Miele products
(e.g. UltraColor, Miele Fabric Softener)
are preset for water hardness
range I (



TwinDos

Detergent type / amount

Maintenance
Back 







Touch the

sensor.

Detergent type

Comp. 

Comp. 

Back 

: Miele UltraPhase 1





: Miele UltraPhase 2



Touch the

sensor.

Compartment 

Miele WoolCare

Miele Fabric softener



Miele UltraColor





Select the detergent you want using
the



and



sensors and confirm

your selection with the

sensor.

Dosage amount - Comp. 

Normal soiling



Confirm the amount of detergent with
the

sensor or change the dosage

amount using the



and



sensors.



Settings for compartment  were

cancelled: the dual component detergent is
only effective if both components are set



Confirm the message with the

sensor.

Detergent type

Comp. 

Comp. 

Back 

: Miele UltraColor





: No entry

Compartment



has been selected. If

you wish to change the setting for
compartment



, proceed as for

compartment



The electronics are set for the new
detergents.

Maintenance

The washing machine has a cleaning
programme for cleaning the TwinDos
system and the hoses inside the
washing machine.

Clean the TwinDos system if it is not
going to be used for a long time or
before changing the brand of liquid
detergent or fabric softener. See
“Cleaning and care - TwinDos
maintenance” for more details.

Summary of Contents for WMR 861 WPS





















































































































Search results

Summary of Contents for WMR 861 WPS

Reviews:

Related manuals for WMR 861 WPS

Brands by name

Popular brands

Miele WMR 861 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMR 861 WPS

Reviews:

Related manuals for WMR 861 WPS

Brands by name

Popular brands