manualshive.com logo in svg

Miele WKR 771 WPS, Operating Instructions Manual

Share
Download
Miele WKR 771 WPS Operating Instructions Manual Download Page 68

Cleaning and care

68

Cleaning the TwinDos system

If the system has not been used

for a long time (more than two
months) the detergent in the hoses
can become viscous.
The hoses could become blocked
and would then need to be cleaned
by a service technician.
Clean the TwinDos system every
time you change brand of liquid
detergent or fabric conditioner or if
the system has not been used for a
long period of time.

The washing machine has a cleaning
programme for cleaning the TwinDos
system containers and the hoses inside
the washing machine.

The TwinDos containers (optional
accessory) are required to carry out
cleaning.

Starting the maintenance programme

Switch on the washing machine and
wait until the standard display lights
up.

Touch the 

 and 

 sensors at the

same time until the following appears
in the display:

Settings

Language 

TwinDos
Time of day

The Settings menu is activated.

Touch the 

 sensor to select the

TwinDos

 option and activate this with

the 

OK

 sensor.

Touch the 

 sensor to select the

Maintenance

 option and activate this

with the 

OK

 sensor.

Rinses

Container 1

Container 2

Container 1 + 2

Touch the 

 or 

 sensor until the

container (or containers) you want
appears in the display and confirm
this with the 

OK

 sensor.

Touch the 

 sensor to select the 

Start

rinse

 option and confirm this with the

OK

 sensor.

Summary of Contents for WKR 771 WPS

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands