Miele WKR 771 WPS Operating Instructions Manual Download Page 14

Page: 14 / 112

Operating the washing machine

Control panel

Display with sensors

See the next page for more
information.

Start/Stop button

For starting the programme selected
and cancelling a programme once it
has started.

Temperature button

For selecting the temperature.

Spin speed button

For selecting the spin speed.

Delay start button

For selecting delay start.

Option buttons

Various options can be added to the
wash programme.

Programme selector

For selecting the wash programme.

Optical interface PC

For service technicians.



button

For switching the washing machine
on and off.
To save energy the washing machine
will switch off automatically 15
minutes after the end of the
programme/anti-crease phase or
after being switched on if no other
selection is made.

Summary of Contents for WKR 771 WPS

















































































































Search results

Summary of Contents for WKR 771 WPS

Reviews:

Brands by name

Popular brands

Miele WKR 771 WPS, Operating Instructions Manual

Search results

Summary of Contents for WKR 771 WPS

Reviews:

Brands by name

Popular brands