manualshive.com logo in svg

Miele WKR 771 WPS, Operating Instructions Manual

Share
Download
Miele WKR 771 WPS Operating Instructions Manual Download Page 17

Before using for the first time

17

Removing the detergent
cartridges from the drum

There are two cartridges containing
UltraPhase1 and UltraPhase2 detergent
for automatic detergent dispensing in
the drum.

Reach under the door grip and pull
the door open.

Take the two cartridges out of the
drum.

Shut the door with a gentle swing.

Inserting detergent cartridges

The detergent cartridges removed from
the drum are components of the Miele
2-phase system consisting of:

1. UltraPhase 1 (base detergent)

2. UltraPhase 2 (detergent enhancer)

These detergent cartridges are for
single use only. Replacement
detergent cartridges are available to
order from Miele or via the internet at
www.miele-shop.com (see end of this
booklet for details). Empty cartridges
should be disposed of via your local
recycling system.

Remove the caps from the detergent
cartridges.

Summary of Contents for WKR 771 WPS

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands