Programmable functions
79
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
The programming is carried out in eight
steps (
,
,
...
) using the sensor
controls.
Accessing the programming level
Pre-requisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
Touch the
Start
/
Add laundry
sensor
and leave your finger on it whilst car-
rying out steps
-
.
Close the washing machine door.
Wait until the
Start
/
Add laundry
sensor
lights up constantly ...
... and then take your finger off the
Start
/
Add laundry
sensor.
After approx. four seconds,
will light
up in the time display.
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear in the time display
as
and a number: e.g.
.
Touch the
or
sensor control to
scroll to the next or previous pro-
grammable function:
Programmable functions
Keypad tone
PIN code
Control field switch-off behaviour
Memory
Additional long pre-wash – Cottons
Gentle action
Reduced temperature
Maximum rinse level
Suds cooling
Anti-crease
Low water pressure
Display brightness dimmed
TwinDos
Dosage quantity UltraPhase 1
Dosage quantity UltraPhase 2
TwinDos maintenance
Degree of soiling
Remote control
SmartGrid
RemoteUpdate
Confirm the selected programmable
function by touching the
Start
/
Add
laundry
sensor control.
