Miele W 489i WPS Operating Instructions Manual Download Page 33

Page: 33 / 76

Electronic programme locking

Programme locking prevents the
machine from being opened or the
programme cancelled during a wash
programme.

To activate programme locking

After the start of a programme, press
the START button for at least 4
seconds until the

locked

check light

(lower right on the control panel)
comes on.

Programme locking is now activated.

The machine will now not accept any
changes and the programme will
proceed through to the end. The door is
locked when programme locking is
activated.

Programme locking is deactivated
automatically at the end of the
programme.

Deactivating programme locking
early

Press the START button for at least 4
seconds until the

locked

check light

(lower right on the control panel)
goes out.

Exception:

If the programme selector has been
moved and the

Anti-crease/Finish

indicator light is flashing in the
sequence display.

First, turn the programme selector
back to the programme chosen
previously. The

Anti-crease/Finish

indicator light will go out.

Now press the START button for at
least 4 seconds until the

locked

check light (lower right on the control
panel) goes out

Locking functions

Summary of Contents for W 489i WPS













































































Search results

Summary of Contents for W 489i WPS

Reviews:

Related manuals for W 489i WPS

Brands by name

Popular brands

Miele W 489i WPS, Operating Instructions Manual

Search results

Summary of Contents for W 489i WPS

Reviews:

Related manuals for W 489i WPS

Brands by name

Popular brands