Miele W 489i WPS Operating Instructions Manual Download Page 28

Page: 28 / 76

Interrupting a programme

Switch the washing machine off with
the I-ON/0-OFF button.

To continue with the same programme:

Switch the machine back on with the
I-ON/0-OFF button.

Altering a programme once
selected

The machine will accept the following
changes after a programme has
started:

– at any time after the start, the spin

speed can be changed within the
limits for the programme.

– up to 6 minutes after the start, the

additional functions

Water plus

and

Intensive

can be selected or

deselected and a different
temperature can be selected for the
programme in use, e.g. from
COTTONS 60°C to COTTONS 40°C.

After the start of a programme it is no
longer possible to select a different
programme, e.g. change from a
MINIMUM IRON to a COTTONS
programme.

If the programme selector is moved, the
indicator light

Anti-crease/Finish

will

start flashing. However, the programme
sequence remains unaffected. The
indicator light will go out again when
the programme selector is moved back
to the programme previously chosen.

Skipping a programme stage

Turn the programme selector to

Finish

As soon as the programme sequence
indicator light for the programme stage
you want the programme to continue at,
starts flashing:

Turn the programme selector back
again to the appropriate programme
within 4 seconds.

Programmes cannot be altered and
programme stages cannot be
skipped if programme locking has
been activated.

To cancel or select a different
programme

Switch the machine off with the I-ON/
0-OFF button.

Turn the programme selector to

Finish

The programme has now been
cancelled.

Switch the machine back on with the
I-ON/0-OFF button.

Select a different programme.

Press the START button.

How to wash correctly

Summary of Contents for W 489i WPS













































































Search results

Summary of Contents for W 489i WPS

Reviews:

Related manuals for W 489i WPS

Brands by name

Popular brands

Miele W 489i WPS, Operating Instructions Manual

Search results

Summary of Contents for W 489i WPS

Reviews:

Related manuals for W 489i WPS

Brands by name

Popular brands