Miele W 463 Operating Instructions Manual Download Page 62

Page: 62 / 68

Gentle action

Activating gentle action reduces the
drum action. Slightly soiled items are
washed more gently.

Gentle action can be used in the COT-
TONS,

Quick wash

Starch

and

Mixed

wash

programmes.

If "Gentle action" is programmed into
the machine, every wash cycle in these
programmes will be carried out with
gentle action rhythm.

The washing machine is delivered with
"Gentle action" deactivated.

Follow steps

to programme

and store in memory.

The programmable functions are acti-
vated to call up further features not
shown on the control panel by using the
additional option buttons in combina-
tion with the programme selector.

Before you begin, first ensure that:

– The washing machine is switched off.

– The drum door is closed.

– The programme selector is at

Finish

Press the additional option buttons

Rapid

and

Water plus

at the same

time, hold pressed in and .

. . . switch the machine on with the
I-ON/0-OFF button.

Let go of all these buttons.

P 0

ap-

pears in the display.

Turn the programme selector to

Mixed wash

The

will now flash in the display al-

ternating with the number

In addition, one of the following will ap-
pear on the right of the display:

= Gentle action is deactivated.

= Gentle action is activated

Press the START button to change
from one to the other. The display will
change accordingly from

from

Switch the washing machine off with
the I-ON/0-OFF button.

The setting you have selected is now
stored in memory and will remain so un-
til you alter it.

Programmable functions

Summary of Contents for W 463





































































Search results

Summary of Contents for W 463

Reviews:

Related manuals for W 463

Brands by name

Popular brands

Miele W 463, Operating Instructions Manual

Search results

Summary of Contents for W 463

Reviews:

Related manuals for W 463

Brands by name

Popular brands