Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Failure to level the machine can result
in the machine "banging" in the spin cy-
cle or "walking" across the floor during
operating.
Energy and water use will also in-
crease.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is deliv-
ered.
^
Using the spanner supplied turn
counter nut
2
in a clockwise direc-
tion. Then turn counter nut
2
together
with foot
1
to unscrew.
^
Use a spirit level to check the ma-
chine is standing level.
^
Hold foot
1
securely with a pipe
wrench. Turn counter nut
2
again us-
ing the spanner supplied until it sits
firmly up against the housing.
,
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Installation and connection
50
Summary of Contents for W 463
