The drum door cannot be opened by pressing the Door button.
Possible cause
Remedy
The machine is not
connected to the
electricity supply.
Put the plug in the socket and switch on.
The washing machine is
not switched on.
Switch the machine on with the I-ON/0-OFF button.
The electronic
programme lock has been
activated.
This is automatically deactivated at the end of a
programme. To deactivate it early see "Locking
functions".
The electronic system
lock has been activated.
To deactivate it see "Locking functions".
Power cut.
Open the drum door as described in the section
"Opening the door in the event of a blocked drain
outlet and/or power failure".
The door was not
correctly engaged.
Press hard against the lock side of the drum door
and then press the
Door
button.
There is still water in the
drum and the machine is
unable to drain.
Clean the fluff (drain) filter and the drain pump.
For safety reasons the drum door cannot be opened when the suds temperature
is higher than 55°C.
Problem solving guide
43
Summary of Contents for W 460 WPS
