F
Add detergent
When the door is closed, the load size
indicator will be replaced with the
detergent percentage display.
Detergent
75%
A
Back
A
The percentage shown relates to the
amount of detergent recommended by
the manufacturer on the packaging.
40%
= Add slightly less than half the
amount recommended
50%
= Add half the amount
recommended
60%
= Add slightly more than half
the amount recommended
75%
= Add three quarters of the
amount recommended
100%
= the full amount of detergent
recommended
You also need to take the level of
soiling and water hardness into
account.
It is important to dispense the correct
amount, because
too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to the
laundry.
– Limescale deposits on the heater
elements.
too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– High water consumption (an
additional rinse cycle will
automatically switch in).
– A burden to the environment.
How to wash correctly
19
Summary of Contents for W 4446 WPS
Page 69: ...69 ...
Page 70: ...70 ...
Page 71: ...71 ...
Page 72: ...Alteration rights reserved 2606 W 4446 WPS M Nr 06 732 370 02 en GB ...