Miele W 4446 WPS Operating Instructions Manual Download Page 10

Page: 10 / 72

Control panel

Programme buttons

For selecting a washing programme.

Display with Menu buttons

See the next page for more
information.

PC / Optical interface

This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.

Extra option buttons

Various extra options can be added
to the washing programmes.

Delay start button

For delaying the start time of a
programme.

Start/Stop button

For starting the programme once it is
selected or calling up the

Stopped:

menu to cancel a programme.

Buzzer button

An audible tone sounds at the end of
the programme.

Load/Detergent button

For calling up the load size or the
recommended amount of detergent,
and for calibrating the load size
sensor to zero.

I-On/0-Off button

For switching the machine on or off.

Door button

Opens the machine door.

Operating the washing machine

Summary of Contents for W 4446 WPS









































































Search results

Summary of Contents for W 4446 WPS

Reviews:

Related manuals for W 4446 WPS

Brands by name

Popular brands

Miele W 4446 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 4446 WPS

Reviews:

Related manuals for W 4446 WPS

Brands by name

Popular brands