Miele W 3844 WPS Allerwash Operating Instructions Manual Download Page 63

Page: 63 / 68

Standby display

To save energy, the display goes out
and the indicator light for the

Start/Stop

button will start flashing

slowly.

The display will always go out,

– if a programme is not selected within

10 minutes of the machine being
switched on.

– 10 minutes after the end of a

programme.

Pressing one of the buttons switches
the display back on again.

You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.

The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.

Not in current prog.

(the machine is delivered with this
option selected)

The standby function is switched off.
The display will remain visible during a
programme.

Memory

The washing machine will store the
most recently selected settings
(programme, temperature, spin
speed and any extra options) in
memory once the programme has
started.

These settings will appear in the
display the next time the machine is
switched on.

The machine is delivered with the
memory function deactivated.

Anti-crease

Anti-crease helps prevent creasing if
laundry is not normally removed
immediately after the end of a
programme.

The drum will turn at intervals for up to
30 minutes after the programme has
finished.

The door can be opened and laundry
removed at any time during the
anti-crease phase.

(the machine is delivered with this
option selected)

Anti-crease is activated.

Off

Anti-crease is deactivated.

Programmable functions

Summary of Contents for W 3844 WPS Allerwash





































































Search results

Summary of Contents for W 3844 WPS Allerwash

Reviews:

Related manuals for W 3844 WPS Allerwash

Brands by name

Popular brands

Miele W 3844 WPS Allerwash, Operating Instructions Manual

Search results

Summary of Contents for W 3844 WPS Allerwash

Reviews:

Related manuals for W 3844 WPS Allerwash

Brands by name

Popular brands